Kverneland 2828 M - 2832 M - 2836 M - 2840 M

Faucheuses à disques à articulation centrale avec position de transport verticale à 125 °

Largeurs de travail de 2,81, 3,16, 3,57 et 3,92 m

Faucheuses à disques à articulation centrale

La faucheuse Kverneland 2800 M à montage arrière offre une grande largeur de travail de 2,80 à 4,00 m avec des poids correspondants de seulement 806 à 940 kg, ce qui signifie que les machines peuvent être utilisées avec des tracteurs de seulement 40 HP pour les plus petites, ce qui rend ces machines très attrayantes pour les agriculteurs ayant de petits tracteurs, mais qui doivent faucher de grandes surfaces. Conjointement aux faucheuses frontales Kverneland 2828 F ou 2832 F, on obtient une largeur de travail totale pouvant atteindre 6,80 m.

Avantages :

  • Disponible avec réglage hydraulique du ressort.
  • Sécurité Non-Stop
  • Transport en position verticale à 125°
  • Suspension centrale
  • Boîtier d'engrenages 540/1 000 tr/min

Spécifications techniques :

  Largeur de travail Nb de disques Poids Puissances requises
2828 M 2,81m 7 806kg 29/40 kW/hp
2832 M 3,16m 8 840kg 37/50 kW/hp
2836 M 3,57m 9 896kg 44/60 kW/hp
2840 M 3,92m 10 940kg 51/70 kW/hp

Hydraulic Spring Adjustment

This feature provides easy and simple setting of the ground pressure. For greater operator comfort, ground pressure of the large suspension spring is set hydraulically from the tractor cab. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure. The chosen ground pressure level is conveniently registered from the easy-to-read scale

125° Vertical Transport Position

  • The mower is folded into a 125° vertical transport position using a hydraulic cylinder.
  • The low gravity point during transport, with the weight of the mower close to the tractor, provides an excellent weight distribution.
  • The tractor and mower remains well balanced, even during high speed road transport, and the machine is fixed during transport by the hydraulic lifting arm.
  • In addition transport height is limited, so passing through narrow gateways or under bridges is not a problem.
  • Another benefit is that the hydraulic cylinder also supports quick lifting of the mower from working to headland position.

Adjustable Gearbox Speed

  • The machines also offer a large degree of operating adaptability, as they are factory fitted with the option of being operated with either 540 or 1000 rpm.
  • It requires no additional accessory. All that is needed is simply to turn the main gearbox on the suspension 180°. 

Centre Suspension

  • The centre pivot suspension provides an even weight distribution of the 2500 H, 2836 M, 3224 MT and 3228 MT and a uniform ground pressure over the complete working width, ensuring good ground contour following.
  • The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.
  • The benefit is less skid wear, optimum protection of the stubble and less fuel consupmtion.


  • To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland BreakBack solution.
  • When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed

Cutterbar with Round Discs

  • Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
  • Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
  • The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
  • The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
  • The fully welded cutterbar gives a very stiff and strong design for high durability.
  • With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.