Kverneland 3628 FT/FN – 3632 FT/FR/FN – 3636 FT/FR

Faucheuses conditionneuses à disques frontales

Les machines frontales Kverneland 3600 peuvent être utilisées en combinaison avec plusieurs faucheuses conditionneuses, comme la série 4300, la 3132 MT ou la 5090 MT, mais également seules, ce qui rend ces machines extrêmement polyvalentes. Avec une largeur de travail de 2,80/3,60 m, la capacité de ces machines est importante.

Avantages :

  • Largeurs de travail de 2,80, 3,20 et 3,60 m
  • Conditionnement par dents en acier semi-mobiles
  • Conditionnement par rouleaux à chevrons
  • Conditionnement par dents en Nylon
  • Suspension de conception innovante
  • Solution ActiveLift Kverneland
  • Vitesse variable du rotor de conditionnement

Spécifications techniques :

  Largeur de travail Nombre de disques Conditionneuse Puissances requises
3628 FT 2,81m 7 Dents en acier semi-mobiles 50/70 kW/hp
3628 FN 2,81m 7 Conditionnement par dents en Nylon 50/70 kW/hp
3632 FT 3,16m 8 Dents en acier semi-mobiles 60/80 kW/hp
3632 FR 3,16m 8 Conditionnement par rouleaux 60/80 kW/hp
3632 FN 3,16m 8 Conditionnement par dents en Nylon 60/80 kW/hp
3636 FT 3,57m 9 Dents en acier semi-mobiles 66/90 kW/hp
3636 FR 3,57m 9 Conditionnement par rouleaux 66/90 kW/hp
KvT_3632-FT_0008.jpg
Video
Animation
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT
Kverneland 3632 FT


Cutterbar with Round Discs

  • Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
  • Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
  • The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
  • The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
  • The fully welded cutterbar gives a very stiff and strong design for high durability.
  • With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
KvT_2600_0013.jpg
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Low noice cutterbar thanks to specially tooled gear wheels.
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Fully welded cutterbar with overlapping C-profiles
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
Round discs will immidiately reject foreign obstacles.
ProFit quick change of knives.
ProFit quick change of knives.
ProFit quick change of knives.

ActiveLift Solution

  • The Kverneland ActiveLift system ensures maximum protection of the cutterbar during operation. If hitting a stone or foreign obstacle, a three-fold action takes place simultaneously.
  • 1. The cutterbar will move back and up, due to the geometry of the suspension.
  • 2. Tension in the ground pressure springs increases, adding additional lift to the mowing section, which helps to clear the obstacle.
  • 3. The angle of the cutterbar repositions from 4° downwards to horizontal, for better clearance of the obstacle.
KvT_3632 FT_0006.jpg

Floating Suspension

  • The suspension design has been redesigned to offer even better flotation and more even ground pressure.
  • The two large suspension springs have been moved further outwards to provide better side stability, which is reflected in optimum protection of the stubble and far less skid wear.
  • The moving pattern of the machines is extremely flexible, allowing downwards movements of 250mm and upwards of 450mm.
  • This ensures excellent adaptation to uneven ground contours and higher reachable speed.
KvT_3632 FT_0005.jpg
Mower reacts instantly to uneven ground contours.
Mower reacts instantly to uneven ground contours.
Mower reacts instantly to uneven ground contours.
Floating Suspension
Floating Suspension
Floating Suspension
Floating Suspension
Floating Suspension
Floating Suspension

SemiSwing Steel Tine Conditioning

  • The SemiSwing conditioner system combines the aggressive conditioning seen from fixed fingers with the excellent tine protection typically associated with free swinging tines.
  • During normal operation the tines are fixed for effective conditioning, but if a SemiSwing tine comes into contact with an obstacle, force will exceed 22kg (48.5lbs) and it will spring back and leave a generous space for the obstacles up to 103mm to pass.
  • The complete conditioner tine has been redesigned to move the centre of gravity. The result is that the tine will stay in position when hitting the crop, to give full conditioner effect and to minimise wear and tear on the turning points.
  • The angle and position of the SemiSwing tines give a better crop transport. The crop is moved away from the conditioner rotor, resulting in reduced risk of blockages and full effect of the conditioner plate.
KvT_4332_LT_0007.jpg
Full conditioning effect.
Full conditioning effect.
Full conditioning effect.
Excellent protection of the tines when hitting foreign obstacles.
Excellent protection of the tines when hitting foreign obstacles.
Excellent protection of the tines when hitting foreign obstacles.
The conditioner is driven by 3 v-belts.
The conditioner is driven by 3 v-belts.
The conditioner is driven by 3 v-belts.
Conditioner plate with fishbone structure for aggressive conditioning
Conditioner plate with fishbone structure for aggressive conditioning
Conditioner plate with fishbone structure for aggressive conditioning

Chevron Roller Conditioning

  • The Kverneland roller versions are equipped with full width chevron rollers, quickly taking the cut crop off of the cutting discs and providing gentle and effective conditioning of fragile crops like lucerne/alfalfa, reducing leaf loss to a minimum.
  • The design of the rollers ensures, that the crop is placed in an even, fluffy swath.
  • The conditioning intensity is varied without use of tools, by adjusting the roller pressure exerted between top and bottom roller.
KvT_3632 FR_0001.jpg
The special roller configuration with the top roller located further forwards than the bottom roller provides a better flow of material.
The special roller configuration with the top roller located further forwards than the bottom roller provides a better flow of material.
The special roller configuration with the top roller located further forwards than the bottom roller provides a better flow of material.

Nylon Tine Conditioning

  • Due to the nylon tines fitted to the conditioner, the total weight of the machine is kept to a minimum, while keeping an aggressive conditioning.
  • The fixed conditioning fingers are made from high quality nylon, to make them very rigid.
  • This means excellent protection from stones and other obstacles. A perfect solution for farmer and smaller contractor machines!
KvT_3228MN_0010.JPG