Kverneland CLC pro Cut
Cultivateur CLC pro Cut pour les résidus longs comme le maïs, le tournesol, colza, canne à sucre, etc... Disponible en 3 m - 3,5 m rigide et 4 m - 4,5 m repliable.
Le CLC pro dans sa variante Cut offre 4 largeurs de travail avec les modèles rigides de 3,0 et 3,5 0m et les modèles de 4,00 m et 4,50 m repliables.
La conception du châssis est la même que celle du modèle «classique» avec l'équipement arrière basé sur des bras à rouleaux maintenant une barre de dents de nivellement devant le rouleau. D'autres équipements sont disponibles pour le CLC pro comme la herse combidisc ou le double train de disques pour une incorporation intense.
La puissance maximale pour le modèle de 3,00 m est de 240 HP.
Un modèle complet à rouleaux est disponible pour cette version Cut.
Le disque coupeur avant peut être réglé hydrauliquement depuis la cabine à n'importe quel moment. Cela signifie que la pression sur les disques est également définie par la position du vérin.
La profondeur de travail est souvent autour de 5 cm pour pouvoir couper les résidus et les racines si nécessaire. Chaque disque est protégé individuellement par quatre boudins en caoutchouc.
Les roulements sont sans entretien.
Zone 1 - Découpe
Avec sa rangée de disques coupeurs frontaux, le CLC Pro cut est la machine idéale pour travailler dans les résidus longs comme du tournesol, du maïs, etc…
Zone 2 - Travail du sol
La rangée de disques coupeurs frontaux est suivie par 2 rangées de dents, avec un large entre-dents (environ 400mm) pour le passage des résidus. L'ailette plus large, Quantum de 345mm, est utilisée. Les dents peuvent avoir des déflecteurs pour une meilleur incorporation des résidus.
Zone 3 - Nivellement
L‘équipement arrière du CLC Pro Cut permet de réduire les besoins en force de relevage. Il peut également être équipé du combi-disc ou du double train de disques. La machine peut être équipée de dents niveleuses et de bras de rouleaux courts. La machine est alors assez compacte pour être utilisée avec un tracteur plus léger. D'autres équipements comme le Combi-disc ou un double train de disques peuvent aussi être utilisés.
Zone 4 - Consolidation
Les rouleaux très actifs assurent un bon rappui et un contact terre/résidus étroit.
| Modèles | CLC pro Cut 300 | CLC pro Cut 350 | CLC pro Cut 400F | CLC pro Cut 450F |
| Nb de dents | 7 | 9 | 11 | 13 |
| Nb de disques coupeurs | 10 | 12 | 13 | 15 |
| Largeur de travail/transport (m) | 3,00/3,00 | 3,50/3,50 | 4,00/2,85 | 4,50/2,85 |
| Min/Max. HP | 100/240 | 135/270 | 185/300 | 190/325 |
| Poids : Boulon de cisaillement, dents de nivellement, Actiring | 1 807 kg | 2 055 kg | 3 017 kg | 3 302 kg |
CLC pro Cut - Strong Frame
- The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
- The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
- The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
- The material used can bear significant loads while staying reliable and light.
- The weight carried by the tractor is thus reduced and helps saving fuel.
- The CLC pro Cut is 50cm shorter than the CLC pro when equipped with the bended arms (from the Classic version), shifting the centre of gravity closer to the tractor.
Tines and Shares
- The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
- The heat treatment is of the same standards as the beams on the Kverneland ploughs.
- For lighter conditions, Kverneland offer the "C" tine with shearbolt overload protection releasing from 2 tons.
- The Kverneland "C" tine equipped with the "Auto-reset" leaf spring safety system is the perfect choice for hard and stony conditions.
- The tine leg can withstand sideway movements of up to 14cm for the CLC pro, CLC pro Classic, CLC pro Cut and to 20cm for the CLC Evo. This means lower stress to the tine holder and frame structure.
- The "C"-tine system is maintenance-free.
Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm
- The "C"-tine: with the standard reversible plough point made of high quality steel for maximum service life. This allows to work at great depths even in stony soil - eliminating plough pans and in this way encouraging natural drainage.
- For stubble cultivation the "C" tine can be equipped with 30cm wing shares.
- New Quantum share 345mm - always in combination with Knock-on® or Tiger carbide point 80mm. It has been designed for use especially in hard soil. The 80mm point combined with the 345mm wing share ensures perfect penetration and complete flat cutting for a homogeneous weed regrowth.
- Two types of carbide points – 80mm and 150mm Tiger point. The special design ensures progressive and high penetration and requires low pulling force. The special shape of the carbide plate resist against aggressive stony conditions. All points available with Knock-on® deflectors too.
- Click here for further details on the Knock-on® system.
Leaf Spring/Vibromat
- For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
- This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
- The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
- The well renowned Kverneland leaf spring protects the tines against overload. The tine starts to release with loads over 640 kg. The release force decreases with the release height to protect the frame against high stress.
- All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
- Therefore the CLC tine system is maintenance-free.
CLC pro Cut - Rear Accessories
The CLC pro Cut can be equipped with a wide range of rear implements.
Levelling tines
- Good levelling capacity
- Good following of the ground contour
- Angle adjustable by turnbuckle
Combi disc harrow:
- Combination of a single disc gang with all roller types
- Intensive incorporation of the residues
- The angel of the disc gang is adjustable
- The depth of the disc harrowis hydraulically adjustable
- Mounted on parallelogram
Double disc gang ø 510 mm:
- Does a good mixing and incorporation
- The angles of the disc gang are adjustable
- Mounted on parallelogram
Cage roller ø 550mm - 90 kg/m
- 10 bars for a good loading capacity and operation in wet conditions
- Effective crumbling action
Double cage roller ø 400mm (tube/flat) - 160 kg/m
- Good crumbling
- Precised depth control
Actipack ø 560mm - 220 kg/m
- The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils, also in wet, stony and sticky conditions thanks to the independent skids and knives
- The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breadown and fine seedbed preparation
Actiring ø 540mm - 160 kg/m
- The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
- The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
- Actiring is not recommended in stony conditions
Actiflex roller ø580mm - 160 kg/m
- The Actiflex roller has been made to create an intensive mixing under all conditions, even stony ones
- The rings are made with spring steel to have a high resistance against stress at high speed
- Actiflex rings are separated by skids to prevent any accumulation inside the roller
- This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting
